Laser level, like every other technical tool, needs to be properly maintained. It is a small device that contains some tiny units performing different functionalities. Having this tool dented as a result of your carelessness may be devastating and damaging to the whole system. You should always ensure it is carefully used and stored with precautions. A thoughtful approach towards the use and storage of your laser gives it more durability. Get yourself inspired by reading below our tips on how to handle this tool. However, before you dive into our article, don’t forget to check the ultimate guide on how to choose the best laser level. 

Tips for Laser Level Usage

Handling a laser level carelessly may be hazardous and damaging to the device. You should always ensure that everything is under control after each use.

  • A key aspect of laser level maintenance is the adequate calibration; for more efficient work, you must calibrate your tool correctly. If the device is knocked down, you should inspect the calibration and verify it doesn’t go beyond the recommended tolerance.
  • Handle the tool with care; the irresponsible approach can lead to a breakdown of its internal units and permanent damage.
  • Ensure only an expert operates the device; it is essential not only for the safety of the tool but also to avert the potential dangers the laser level may pose.
  • Don’t disassemble the laser; a non-expert can damage it and lose the offered warranty.
  • Keep in mind that the base should be wide enough while setting up the device on a tripod. Narrowing the base may lead to a breakdown and make it less functional.
  • Adjusting your laser level close to a concrete pour during construction may lead to the device breakage due to the splash of the pour.

Temperature Level

Do you want to know why some laser levels go nasty and rusty? Temperature is an important factor to be considered in the use and storage of this tool;

  • To ensure durability and avert damaging the battery or melting the plastic components of the device, avoid placing it in a heated area.
  • Warming up this tool, initially stored in an extremely cold area, to restore it to its operating temperature could lead to the condensation and ruining its circuit board.
  • Make sure you always use and store the device at the recommended temperature.

Prevention of Elements Malfunction 

Exposing your laser level to some factors may cause some damage to it:

  • Non-waterproof laser levels shouldn’t be placed or used near water to avoid moisture.
  • A water-resistant laser level should be dried off after use if exposed to water or rain. Take the device to a service center at least once in a year for purging. The process of purging pressurizes and cleans the tool with the help of dry nitrogen to extract moisture.
  • Storing or using it in a dirty or dusty area poses a danger to the functionality of its units, which leads to corrosion. Even if your laser level is dust-proof, don’t expose it so long to dust.
  • Though some laser levels are shake-proof, avoid violent vibrations.

Tips for Transporting Laser Level

The demand and versatility make this tool mobile for work sites. Transporting the device, however, requires some safety measures:

  • First of all, turn it off.
  • Put the tool to its case before transporting it for long-distance.
  • Don’t place other construction materials on the same bed of pickup truck.

Maintaining the Battery 

The battery level of this device also affects its durability. Following steps will help upkeep the battery quality to avoid unwarranted expenses:

  • Prevent the deterioration of the device’s battery level, which may pose a possible danger to the units.
  • Remove the battery if the tool is not in use for three months to avoid deterioration.

Tips for Charging 

It is essential to keep the right charging level for the battery to facilitate better proficiency:

  • Usually, a laser level is powered by a Nicad battery; the latter needs to be fully charged and recharged for greater durability.
  • Avoid overcharging not to cause overheating that spoils the battery. Ensure you regulate it through the charge level indicator; check the manual for instructions.
  • Cycle the battery at least once a month.

Tips for Storing the Device

  • Turn off the device and remove its battery before storing it.
  • Keep it in its original case. Avoid mixing with moisture.
  • Ensure you store the unit in an enclosed environment with a regulated temperature.
  • Keep the laser level and its components out of the reach of children. This is in a bid to avoid accidental breakage.


Conservapedia has suggested that the laser level is commonly used to measure the consistency of a land surface. However, maintaining and properly keeping this device is key to its durability. It’s advisable to manage it adequately and guarantee appropriate working conditions through prompt and careful maintenance and usage to avoid any damage. Have you ever experienced any difficulties with your laser level? Kindly share your comments.